Fire Retardant Spray | Fire Retardant Coatings

FLAME SAFE

FLAME SAFE FIRE RETARDANT PRODUCTS

THE MOST EFFECTIVE FIRE RETARDANTS AVAILABLE

For Technical Information, Test Reports, and MSDS go to www.flame-safe.com

click desired information below desired product logo

Quick, Easy Application, Odorless, Colorless, Non-Toxic, Not harmful to plants or animal. All Flame Safe’s products are fungus inhibitors, termiteresistant, resistant to insects, rodents and certain molds. Flame Safe’s fire retardant treated materials and flame retardant wood require no special cutting tools

Flame Safe's FIRE POLY™ coating are high intumescent fire retardant coatings that have been formulated and developed specifically for the wood and wood products industry. FIRE POLY™ has been tested by Underwriters Laboratories (UL) and Southwest Research Institute(SWRI), Maxim Technologies, Universal Laboratories and more . Exterior and interior fire retardant coatings for wood, plywood, OSB, I-joists, timbers,blocking, decks, balconies, fencing

FIRE POLY™ FP100 interior/exterior high intumescent fire retardant coating - FS<5 - coverage rate 175-200

sq.ft./gal

FIRE POLY™ FP75-E exterior fire retardant coating [ASTM D2898 procedure] - coverage rate 166-200 sq. ft/gal

FIRE POLY™ FP75-E (ws) exterior fire retardant coating [ASTM D2898 ] - coverage rate 166-200 sq. ft/gal -

paintable

FIRE POLY™ FP75-I interior fire retardant coating - coverage rate 166-200 sq. ft/gal - semi gloss finish

FIRE POLY™ FP75-I (ws) interior fire retardant coating - coverage rate 166-200 sq. ft/gal - flat finish - paintable,

stainable

FIRE POLY™ FP50 interior fire retardanr coating - coverage rate 166-200 sq. ft/gal - paintable, stainable - satin

finish

Flame Safe’s FIRE POLY™ FPCC - formulated for fire retarding plastic pipe, composite, fiberglass, PVC, and polyurethane foam,and styrofoam foam. Testing at Southwest Research Institute FIRE POLY™ FPCC passed the International Maritime organization Resolution A 753 (18) and ASTM F1173-95 test for plastic pipe. FIRE POLY™ FPCC fire retardant is used for marine and off shore composite piping systems. FIRE POLY™ FPCC is a binary fire retardant product. When ready for use combine the additive with the liquid Fire Poly as per manufacturer ‘s instructions. Apply in 3 light coats (600 sq.ft. /coat) allowing drying time between coats with a final coverage rate of 200 sq.ft/ gallon.

Flame Safe's WOOD SAFE (formally J.D.P. 108) is a is an aqueous based resin that is colorless, odorless, non-toxic, and environmentally friendly fire retardant for interior use. Long term fire retardant protection, WOOD SAFE, can be applied to any type of wood such as yellow pine, douglas fir, SPF, cedar, oak, birch, walnut, and redwood. WOOD SAFE is applied in 3 coats (330-390 sq.ft. /coat) allowing drying time between coats, with the final coverage rate of 110-130 square feet to the gallon. WOOD SAFE creates a barrier to fire. The chemical reaction, when exposed to flame , creates an intumescing action causing the surface to bubble up and thereby creating barrier between the fire and treated material. Structures under construction can be effectively made fire safe. As soon as the surface is enclosed, spray all exposed interior surfaces such as studs, trusses, subfloor, joist and interior outside walls.

Flame Safe SHINGLE SAFE™ has been tested by Western Fire Center and is classified as a Class B fire retardant coating and by Southwest Research Institute and classified as a Class C fire retardant coating that meets the ASTM-E-108 [Burning Brand, Flying Brand, Spread of Flame and Intermittent Flame Exposure] classification for wood shingle roofs. The coverage rate for SHINGLE SAFE™ fire retardant is 120 -140 sq. ft. to the gallon. Apply by spray, beginning at the ridge and working down and across the roof surface. For optimum results, to inhibit or drastically reduce the wind tunnel or blow torch effect of fire in the attic area, fire retard the underside of the roof in the attic, as well as other substrates, including blown cellulose insulation with SHINGLE SAFE™.

THATCH SAFE ™ 1 fire retardant coating is formulated to fire retard natural thatch, reed, bamboo, koa, cypress, and palm to comply with the NFPA 701 test standard. THATCH SAFE™ fire retardant will give a semi gloss appearance when applied that gradually changes back to the natural appearance.

THATCH SAFE ™ 2 fire retardant coating is formulated to fire retard synthetic thatch, reed, and bamboo, to comply with the NFPA 701. THATCH SAFE™ 2 fire retardant, when applied THATCH SAFE™ 2 leaves a slight gloss that gradually changes back to the original appearance.

FABRIC SAFE is a fire retardant spray on coating for natural fabrics and most synthetic and synthetic blends. FABRIC SAFE can significantly reduce the hazard of fire because of its ability to double or triple the flashpoint ofr most materials. It forms a barrier which inhibits ignition of the fire treated material and restricts the char to the immediate area exposed to flame. FABRIC SAFE is a water based, clear, non-toxic, and odorless. The coverage rate of FABRIC SAFE is 300-500 square feet per gallon depending on the type and weight of the material being fire retardant treated. In most instance FABRIC SAFE is applied with a spray applicator. A sponge can be an effective method of applying FABRIC SAFE fire retardant on wallpaper and wall coverings. All textiles/fabrics lose some of their fire retardant qualities after deep cleaning, therefor re-treatment with FABRIC SAFE is advised to achieve maximum results. Pile or high tufted carpet in particular is suitable for FABRIC SAFE fire retardant treatment after deep cleaning.

FABRIC SAFE for canvas tarps, awnings, tents, burlap, and hemp ropes can be used for both exterior and interior applications. FABRIC SAFE fire retardant for canvas can be applied by spray coating, brush or dipping. FABRIC SAFE for canvas is warranted for 5 years or 200 inches of rain whichever comes first.

This FABRIC SAFE fire retardant can be used on leather. Treat the leather from the back side only

ASTM E84 CLASS B

UL 723 TYPE 2

NFPA 255, UBC 42-1

ASTM-E-108 Class B

NFPA 701

FAR 25.853 A & B

NFPA 701, Cal1237.1 , Boston, New York-New Jersey Port Authority, Cal Tech 117-F, Section 1237.1, Title 19 Public Safety Code regulations from California, Federal Standard 16 CFR (FF4-72)

FIRE POLY™

ASTM E84 CLASS A

UL 723 TYPE 1

NFPA 255

UBC 42-1

ASTM D2898 procedure

ASTM E2768

NFPA 701

Copyright Flame Safe Chemical Corporation and Flame Safe Wood Products, Inc. 1995 revised 2009; revised 2012. This text and related information may not be reproduced in whole or in part by any means without the express permission of Flame Safe and it’s affiliates.

Hotline: 1-800-333-9197 Ph: 817-740-9197 Fax: 817-740-9199

After Hours: 817-658-9197 Email: fireprod@aol.com

2653 Warfield Street Fort Worth, TX 76106 USA 817-740-9197 | fireprod@aol.com

Dallas, Fort Worth, Austin, Houston, San Antonio, El Paso, Dallas, Amarillo, Abilene, Lubbock, Corpus Christi, North, Dallas, Dallas county, Midland, Odessa, Plano, Frisco, Wichita Falls, East Dallas, and more

.ASTM E162

ASTM E662Â

PPP -B - 00636L

PPP -B - 320

PAPER SAFE is a water-based, clear, odorless, non-toxic, and environmentally friendly fire retardant coating. Applied at a rate of 300 to 500 square feet to the gallon PAPER SAFE is an excellent fire protection for holiday/seasonal paper decorations . Before applying PAPER SAFE check for color fastness.

PAPER SAFE, formulated and developed specifically for the corrugated board, cardboard box and packaging industry is a fire retardant coating and penetrant. PAPER SAFE exceeds the United States Navy's fire retardant standard ASTM-E-162 (flame spread), as well as standard ASTM-E-662 (smoke generation). PAPER SAFE is an aqueous based resin that is colorless, odorless, non-toxic, and adds no appreciable weight. The National Fire Protection Association (NFPA) - 30 Standard became effective September 1, 1991, which requires that combustible liquids in plastic containers be packaged in some sort of noncombustible shipping container. NFPA-30 is only concerned with the ability of the full assembly to pass the fire requirements of the U.L. Procedure Subject 2019. Flame Safe's PAPER SAFE as a component part will assist in the passing of the "Final Assembly Package Procedure".