ACCREDITED 3RD PARTING TESTING
ASTM E84 CLASS A - UL 723 TYPE 1 - NFPA 255 - UBC 42-1
Flame Safe Wood Products fire retardant lumber,plywood timber and wood specialties have been tested by accredited third party testing agencies. Flame Safe will furnish test reports upon request, in addition to those published on our web site www.flame-safe.com
Flame Safe lumber is kiln dried to a moisture content not to exceed 19%. Flame Safe plywood is kiln dried to a moisture content not to exceed 15%. Flame Safe's finished moldings and trim is kiln dried to a maximum moisture content of 6 to 12 % depending on the species and specific use. Pitch in the wood is crystallized permitting interior and exterior finishes to be easilly applied. When kiln dried, Flame Safe fire retardant treated wood becomes lighter and stronger, maximizing it's structural uses.
FLAME SAFE
Hotline: 1-800-333-9197 Phone: 817-740-9197
After Hours: 817-658-9197 email: fireprod@aol.com
FLAME SAFE WOOD PRODUCTS, INC.
Vacuum Pressure Impregnated - Kiln Dried After Treatment (KDAT)
Lumber, Plywood, Timber, Shake Shingles, Architectural, Millwork, Specialty Treatments
Interior
Fire Retardant
Lumber
Interior
Fire Retardant
Plywood
Exterior
Fire Retardant
Plywood
Interior
Fire Retardant
Timbers
Exterior
Fire Retardant
Timbers
California Administrative Code, Title 19, Public Safety, Article 3, Section 1264.3, "Christmas Trees"
TREE SAFE is a fire retardant spray on coating primarily used for indoor Christmas trees. In addition, TREE SAFE acts as a wood preservative keeping the needles of the tree greener for a longer period of time. One quart covers up to an 8' tree. With a mist sprayer, start at the top of the tree and spray all branches and foliage. After spraying pour the remainder of the TREE SAFE into the stand reservoir mixed with water. Allow the tree to dry indoors or in a covered area.
TREE SAFE is an excellent fire protection on dry grass and brush. It's application can slow or stop the advance of the flame front caused by winds in areas of exceptionally low humidity.
As a Federal Emergency Management Agency (FEMA) partner, Flame Safe offers a substantial discount to homeowners and business in high risk fire areas.
Flame Safe also manufactures fire retardant fabric products, such as it's trademarked FIREBUSTER. The FIREBUSTER has been treated with a fire retardant chemical and shown in tests not to burn at temperatures exceeding 2000 degrees Fahrenheit. Tests conducted by Southwest Research Institute shows that the FIREBUSTER surpasses all requirements of the test procedure Cal 1237.1 by as much as 700%. Putting a FIREBUSTER over a fire will cut off the flow of oxygen thereby extinguishing the fire. It will eliminate the heavy smoke, while filtering the remainder.
PROPERTIES OF FLAME SAFE FLAME RETARDANT LUMBER and PLYWOOD
Permanence: Flame Safe exterior and interior flame retardant lumber and plywood is a permanent guard against the spread of flame. Strength: Flame Safe's aqueous based resin treatment and kiln-drying process strengthens the wood.
Hygroscopicity: Flame Safe's exterior and interior flame retardant lumber and plywood is no more hygroscopic than untreated wood of any given species. Corrosion: Flame Safe exterior and interior flame retardant lumber and flame retardant plywood does not demonstrate any greater corrosion rate than untreated wood on metal fasteners or hardware. Decorating and Finishing: Flame Safe exterior and interior flame retardant lumber surfaces can be stained and painted with ordinary preparation, however avoid using lacquer based stains or varnishes. Field Cuts: Flame Safe exterior and interior flame retardant wood allows the user to re-surface, mill, or rip lumber or plywood provided the exposed surfaces are coated with Flame Safe fire retardant coating (Fire Poly). Versatility: Flame Safe exterior and interior flame retardant lumber and plywood is compatible with most waterborne preservative treatments for lumber, plywood and timber for exterior and in ground use
FLAME SAFE is dedicated to setting not merely following the fireproof industry standards through ongoing research development and testing programs. FLAME SAFE continually endeavors to educate the marketplace on the significance of fireproofing combustible materials through the use of flame retardant products.
Copyright 2012: Flame Safe. Fire Retardant Coatings. All rights reserved.
2653 Warfield Street Fort Worth, TX 76106 USA 817-740-9197 |Â fireprod@aol.com
Dallas, Fort Worth, Austin, Houston, San Antonio, El Paso, Dallas, Amarillo, Abilene, Lubbock, Corpus Christi, North, Dallas, Dallas county, Midland, Odessa, Plano, Frisco, Wichita Falls, East Dallas, and more
Flame Safe's fire retardant treated wood is a low cost, effective building material for homes, apartments, manufactured housing, hotels, restaurants, decks, docks, commercial, industrial and institutional buildings for interior and exterior use.
