FLAME SAFE FABRIC SAFE
FIRE RETARDANT
HomeFlame Safe ProductsFire Retardant WoodTestingAbout Us- ServicesContact UsVideos
Fire Poly FP100Fire Poly FP75EFire Poly FP75IFire Poly FP50Fire Poly FPCCWood SafeShingle Safe
Thatch SafeFabricSafePaper SafeTree SafeFlame Safe Logos & ImagesFlame Safe Logos & Images

FLAME SAFE
Hotline: 1-800-333-9197 8am-5pm (CST) Ph: 817-740-9197 
After Hours: 817-658-9197 email: fireprod@aol.com 
Dallas, Fort Worth, Austin, Houston, San Antonio, El Paso, Dallas, Amarillo, Abilene, Lubbock, Corpus Christi, North, Dallas, Dallas county, Midland, Odessa, Plano, Frisco, Wichita Falls, East Dallas, and moreallas, Fort Worth, Austin, Houston, San Antonio, El Paso, Dallas, Amarillo, Abilene, Lubbock, Corpus Christi, North, Dallas, Dallas county, Midland, Odessa, Plano, Frisco, Wichita Falls, East Dallas, and more
.
Class B

Passed
Class A
Passed
Passed
Passed
Passed
FABRIC SAFE TECHNICAL DATA
 (INTERIOR)
PRODUCT DESCRIPTION: Aqueous Based Resin​

​PRODUCT ANALYSIS

Total Solids: 18%    PH: 5.0 -5.2  
Flash Point:  non-flammable
Specific Gravity: 1.110
Weight per gallon 9.1 lbs
Color:  Water clear at 78°F.- slight haze at 50°F.and lower
Volatibility:  Non-volatile
Solvents:Water (contains no petroleum or derivatives of petroleum.)
Anti-Fungus:Good resistance
Bacterial: Good Resistance 
Linear shrinkage:None
Moisture Absorption: None
Corrosive:Mildly
Toxic: None
Insects, rodents, aspergilli and other types of molds: Good resistance
Not harmful to plants, animals
TEST
MATERIAL TESTED
100% Cotton  100% Synthetic
RESULTS
CFR 1632.4
  (FF 4-72)

FAR 25.853 a & b
CALIF 1237.1
NFPA 701
CAL TECH 117-F
NY-NJ PORT
BOSTON
Mattress Ticking
Mattress Pads
Upholstery
Textiles
Aircraft Interiors
Draperies
Wall Coverings
Cotton Muslin
Fabrics / Films
RECOMMENDED USE:  Interior

FLAME SAFE FABRIC SAFE  is a fire retardant that can be applied to all natural and most synthetic and synthetic blend fabrics, such as 

Carpet -   Cotton - Polyester - Draperies - Synthetic blends -  Wall Coverings - Mattresses

ENVIRONMENTAL REGULATION:
This product complies will U. S. Federal Regulations concerning the use of lead in paint and hydrocarbon emissions.
   QUICK REFERENCE FOR APPLYING FABRIC SAFE
fire retardant coating, fire retardant spray, flame retardant coating, flame retardant spray, fire retardant coating, fire retardant spray, flame retardant coating
MATERIAL
APPLICATION
COVERAGE
Textiles/Fabrics
Treat with retardant according to manufacturer’s specifications
Apply with a mist applicator held 6" -8” from surface
Allow to dry before use.
Treat both sides where possible.
300 - 500 sq. ft. per gallon.

Do not saturate, retardant will easily penetrate material.
Fabric Areas
Apply with spray applicator.
Apply to all sides and interior of pillows, seat cushions and underside of chairs and sofas. 
Check for color fastness by apply a small amount of retardant to an obscure area
Treat until damp to touch.
Turn stuffed chairs and couches over, remove back cover, treat inner parts of items, replace backing material.

Apply chemical with mist applicator or sponge.
Wallpaper, wall covering
Treat until damp.
Treat until damp.
Apply with spray applicator.
Carpet
INTERIOR :
Treatment of drapes, furniture, artificial flowers, carpets and wall coverings with Fabric Safe, gives excellent protection against ignition, flame spread and afterglow. It forms a barrier which inhibits ignition of the treated material and restricts the char to the immediate area touched exposed to flame. Fabric Safe is a water-based, clear, odorless and non-toxic fire retardant. All surfaces to be treated must be clean. Due to the vast variety of textiles and fabrics, it is important to check for color fastness. This is done by applying a small amount of retardant to an obscure area and letting it dry ( a hair dryer will aid in drying). Apply retardant as it comes from the container. DO NOT DILUTE OR MIX FABRIC SAFE WITH ANY OTHER PRODUCTS. The coverage rate of Fabric Safe is 300 to 500 square feet per gallon depending on the type and weight of the material being treated. Fabric Safe, in most instances is applied with a mist applicator. A sponge can be an effective method of applying the retardant on wallpaper and wall coverings. All treated textiles/fabrics lose some of their fire retardant qualities after deep cleaning, therefore re-treatment with Fabric Safe is necessary to achieve maximum results. Pile or high tufted carpet in particular, is suitable for treatment immediately after cleaning. Be sure all materials are dry before applying Fabric Safe.
CAUTION:
Product must not freeze. It must not be thinned or diluted.

OVERSPRAY:
The overspray will not harm plants or animals. A rag wetted with bleach and water mix will clean up spotting.

CLEAN UP PROCEDURE:
1. Run bleach and water mix through spray mist applicator for cleaning any residue.
2. Rinse sponges with bleach and water mix.

SAFETY FIRST:
If eye contact occurs, flood with water for fifteen (15) minutes and call a physician. KEEP OUT OF REACH OF CHILDREN. DO NOT TAKE INTERNALLY.